...
- Getting started with:
- AWS - This is the 'Carbide' project.
- Will Stevens : I have not had a chance to validate this process.
- CentOS
- Will Stevens : I have spent quite a bit of time testing this process. However, the manifest that is used in this process does not seem to be tied to the currently maintained manifest process. It is unclear if the manifests documented in this process is maintained.
- Ubuntu
- Will Stevens : I have not tested this process, but it is very similar to the CentOS process above. Again, it is unclear if the manifest associated with this recipe is maintained, as it does not seem to be associated with the currently maintained manifest process.
- OpenStack
- Will Stevens : I have not tested this process. It is based on the Ansible Deployer.
- AWS - This is the 'Carbide' project.
- Deployment option not represented at the top level on this page:
- Ansible Deployer for Kubernetes
- Will Stevens : I have not had a chance to test this process yet, but I believe it should be added as a top level deployment option.
- tungstenfabric/tf-devstack
- Will Stevens : I have not had a chance to test this process yet, but I believe it should be added as a top level deployment option.
- Gary Greenberg would you be willing to add some sub-points to this section to provide some details on the experience of using `tf-devstack` and potentially document issues you feel should be addressed?
- tungstenfabric/tf-dev-env
- Will Stevens : I have no experience with this repo. I am unclear to me how this repo compares with the `tungstenfabric/tf-devstack` and which should be the preferred dev environment. It is worth pointing out that this repo is a fork of the juniper/contrail-dev-env repo. It is unclear how these repos are maintained and what support the user can expect when using these repositories. From what I can tell, the juniper/contrail-dev-env repository was used to build the actual release. What is the plan for these repositories?
- A major challenge today is that the manifests which are tracked in this repo are not versioned, so it is impossible to know what are the appropriate manifests for a specific version of TF.
- I have not found a central document which covers the different manifest parameters and what they are responsible for. The closest I have found is this merge request which introduces them into the repo docs, at least with this you can find the appropriate files.
- Ansible Deployer for Kubernetes
- Tungsten Fabric Architecture
- Currently, the very detailed TF Architecture documentation is listed under the "Start using Tungsten Fabric" section. I would recommend this gets broken out into an actual Architecture section with a brief description of to expect from that architecture document.
- Tatsuya Naganawa has put together a Tungsten Fabric Primer which covers a lot of important topics. It is available here: https://github.com/tnaganawa/tungstenfabric-docs/blob/master/TungstenFabricPrimer.md
- Tony Liu has put together a Tungsten Fabric API configuration guide: https://github.com/tonyliu0592/contrail/wiki/API-Configuration
- Becoming a contributor:
- In general, the details on this page are very focused on the process to contribute to the Juniper repositories and their Gerrit (https://review.opencontrail.org). Given the fact that the actual code repos are still in Juniper, it is painfully confusing what should be documented for contributing to the code today. We have a mix of both Juniper specific details and Tungsten Fabric assets on this page, and it is extremely unclear what is relevant and what is not.
- I (Will Stevens) recommend that we clearly call out the fact that the code is in the process of moving and the process and location of the different assets and processes associated with them are documented separately.
- Current code location, OpenContrail (Juniper Repos)
- Code managed in Gerrit at: https://review.opencontrail.org
- CLA for contribution is at: https://review.opencontrail.org/#/settings/agreements
- CLA files to be signed are located at Contributor License Agreement and must be manually emailed to cla@lists.tungsten.io. Additional detail on the manual process can be reviewed here: https://jira.tungsten.io/browse/TFB-1417
- If you run into issues when interacting with the manual CLA process, please open a jira ticket and associate it with this epic: https://jira.tungsten.io/browse/TFB-1416
- Target code location, Tungsten Fabric (LF Repos)
- Code managed in Gerrit at: https://gerrit.tungsten.io
- CLA for contribution is at: https://gerrit.tungsten.io/r/settings/ (Navigate to Agreements)
- The CLA management is automated through gerrit.tungsten.io through the Agreements settings section.
- If you run into issues when interacting with the automated CLA process, please open a jira ticket and associate it with this epic: https://jira.tungsten.io/browse/TFB-1418
- Community Jira: https://jira.tungsten.io
- Community Wiki: https://wiki.tungsten.io/
- Current code location, OpenContrail (Juniper Repos)
- New features are introduced to the TF community through use of Blueprints.
- Blueprints are tracked in Jira here: https://jira.tungsten.io/projects/TFP (which will redirect you to one of the blueprints)
- Blueprints should be associated with a Spec. The spec is a detailed technical document which outlines the technical details associated with the feature/function change.
- Specs are tracked in this repo: https://github.com/Juniper/contrail-specs
- While the Blueprints track the intent, the actual work is tracked in Jira in the following section: https://jira.tungsten.io/projects/TFB (again, this will redirect to a specific issue)
- Despite the Specs being tracked in Github, all the contribution is expected to be done through Gerrit. This is likely a point of confusion...
- The Contribution Process
- All the code is managed through Gerrit (either the old or new Gerrit), despite all of the repositories being published on Github.
- In order to contribute, you must first sign one of the CLAs. The CLA must be associated with the contributors account in Gerrit as a CLA is a gating function for being able to accept contribution.
- ICLA - Is the 'Individual' contributor license agreement and is used when your organization does not have a CCLA which you can be associated with.
- CCLA - Is the 'Corporate' contributor license agreement and is used to associate many contributors within an organization to a single legal agreement.
- Once you have a CLA, you will need to install git-review to properly format and submit merge requests against the repositories in Gerrit.
- While somewhat outdated and very OpenContrail specific, the best documentation I have found which describes the contribution process is this: https://github.com/Juniper/contrail-community-docs/blob/master/Contributor/GettingStarted/getting-started-with-opencontrail-development.md
- This document should be updated to reflect Tungsten Fabric and moved into the TF docs domain.
- Additional Documentation Resources
- Currently, the only repository in the new gerrit.tungsten.io is the `docs` repo. In an effort to understand and document the process of contribution in this new Gerrit environment, we are working with this repo: https://gerrit.tungsten.io/r/admin/repos/docs
- Tungsten Fabric was provided an export of the Contrail documentation, which has been converted to RST format and is currently in the process of being sanitized prior to being incorporated into the core docs repo (above). It can be found here: https://github.com/tungstenfabric/tf-transitional-contrail-docs
- A Tungsten Fabric training course is being developed. The content covered in this training course is available here: https://docs.google.com/document/d/1xstx1TRDGtuTeaI6xks6_S9mPesCD1XXIXd4wI9zn7E/edit
- A "Carbide Evaluation Guide" (CEG) is being developed privately by a Juniper employee (Dmitri Kalintsev) and the guide is privately available here: https://docs.google.com/document/d/1RDwLfcZkZfP_b2MDrxIyl3zsy0UrQEErZAStI_Mvv08/edit
- Through the GSoC program,Fayaz Akhtar , is developing a Quickstart Guide for setting up TF as a CNI for K8s. WIP document is here: https://docs.google.com/document/d/1UaC-H9OPiiWU-e7KVhLL3rc29q7ZWWKDvXSo3U5EsSU/edit
- Will Stevens has developed automation to deploy K8s + TF on cloud.ca for varies demos based on the CentOS "1-line install", with adaptations to get everything working. The source code is available here: https://github.com/cloudops/tf-demo
- Juniper's official Contrail Cloud Deployment Guide (has some info relevant to TF): https://www.juniper.net/documentation/en_US/contrail5.0/information-products/pathway-pages/contrail-cloud-deployment-guide-13.0.pdf
- Juniper's Contrail + Kubernetes documentation: https://github.com/Juniper/contrail-kubernetes-docs
...